Install License By Using License Manager - Keysight M9290A Getting Started And Troubleshooting Manual

Step Action
4. Verify installation Launch Modular SA application.
Click Utility, System, Show, System.
Verify that the new application
appears in the list.

Install License by Using License Manager

For the user who is not available to use the USB storage device, the license manager
can be used to install the license through network. The License Manager is installed
while the CXA-m software is installed. Please follow the following steps to install
the license with License Manager:
1. Follow the procedures above to redeem the license.
2. Place the license file either on a network-connected driver or any other place
3. Starting License Manager.
Licensing Measurement Application Software - After Initial Purchase
where the controller can access it.
To start Keysight License Manager from the Windows Start menu, click the
Windows Start button, and then select: All Programs > Keysight License
Manager > Keysight License Manager. Refer to the following figure for
overview of License Manager GUI.
Software Installation and Licensing
Notes
This displays the list of installed applications.
If you require further assistance, please contact
the Keysight support team.
Online assistance:
http://www.keysight.com/find/assist
If you do not have access to the Internet, contact
your local Keysight Technologies Sales and
Service Office.
31