Keysight M9290A Getting Started And Troubleshooting Manual page 40

Launching Modular SA Application
Application Launcher
Please refer to the table below for the features of the launcher.
Items Description
Selected Indicates whether this module is selected. If this module is selected, the check box of
that module will be checked
Chassis Shows the Chassis Number in which the module is inserted in. This column will only be
Number visible when there is chassis number greater than 1. When there is only one chassis used,
this column will be invisible, the panel shows as following:
If there is more than one chassis used, Chassis Number information will also be shown as
a part of application title information, such as:
For the module which is uninstalled, the Chassis Number is shown as "NA".
Slot Shows the Chassis Number in which the module is inserted in. For the module which is
Number uninstalled, the Slot Number is shown as "NA".
Slot number will be shown as a part of application title information, such as:
Model Shows the model name of the module.
Visa VISA address string for the module. If the module is uninstalled, the VISA address will be
Address shown as "NA".
Status It indicates the status of each module as following:
• Idle: The module is in Idle state, no application running or FPGA updating with the
module. It can be used to launch a Modular SA application.
• Running: Modular SA application is running with the module. You can not launch
another Modular SA application with this module.
• Update FPGA: FPGA on the module is being updated, or the FPGA on the module need
be updated.
• Uninstalled: The module is not installed in the chassis. It is loaded from the saved
configuration file but the module has been unplugged.
40