Table of Contents
Advertisement
Item
4
Banner - shows the name of the selected application
that is currently running.
5
Measurement title - shows title information for the
current measurement, or a title that you created for
the measurement.
6
Settings panel - displays system information that is
not specific to any one application.
• Input/Output status - green LXI indicates the LAN is
connected. RLTS indicate Remote, Listen, Talk, SRQ
• Input impedance and coupling
• Amplitude Correction Status
• Frequency reference selection
• Setting of automatic internal alignment routine
7
Active marker frequency, amplitude or function value Marker
8
Settings panel - time and date display.
9
Trace and detector information.
10
Key labels that change based on the most recent key
press.
11
Displays information, warning and error messages.
Message area - single events, Status area -
conditions.
12
Measurement settings for the data currently being
displayed in the graticule area. In the example above:
center frequency, resolution bandwidth, video
bandwidth, frequency span, sweep time and number
of sweep points.
Description
Running Modular SA application
Display Annotations
Function Keys
Mode
Meas
View/Display, Display, Title
Local and System, I/O Config
Input/Output, Amplitude,
System and others.
System, Control Panel
Trace/Detector,
Clear Write (W) Trace Average
(A) Max Hold (M) Min Hold (m)
Trace/Detector,
More,
Detector,
Average (A) Normal (N) Peak
(P) Sample (S) Negative Peak (p)
Softkeys
System, Show, Errors
Keys in the Analyzer Setup part of
the front panel.
51
Advertisement
Table of Contents
