Table of Contents
Advertisement
Hardware License Installation
Hardware license is the license that works with specified hardware features, such as
"B25", "FSA". Hardware license can only work with the module that installed the
license on.
Hardware license is pre-installed inside module in factory before shipment, installing
HW license is only requested for HW upgrade.
Following steps shows the recommended method to install hardware license:
1. Install hardware license file on controller by using Keysight License Manager.
Please refer to
2. Open launcher and click "Module License" button, the module license window
with available hardware licenses you installed in step 1 will be shown as
following.
3. Click "Install All New HW Licenses" to install the hardware licenses. If there are
multiple available licenses on multiple modules, all licenses on each module will
be installed at same time. It will take several seconds to install the hardware
licenses. After hardware license is installed successfully, the "New HW licenses"
column will be empty and the "Install All New HW License" button will be
disabled and grayed out.
4. Click on the module in the module list which you installed the hardware license
on, make sure the hardware license is installed successfully from the module
information on the right of the window.
"Install License by Using License Manager" on page
Launching Modular SA Application
Application Launcher
31.
43
Advertisement
Table of Contents
