Installation Tools; Components; Unpacking - Will Burt ACCUPOINT AP-8 Operator's Manual

2.2 Installation Tools

Table 2-1 lists tools and materials recommended for installation.
Safety Glasses
Hard Hat or Helmet
Wire Cutter / Stripper
Spirit Level
Thread-Locking Compound or Locking Hardware
Laptop with RS 485 Connection Kit, installed GUI

2.3 Components

When unpacking, check to ensure all ordered components have arrived. The components
your system includes will vary based upon your order.
Possible components include:

Positioner

Mating Connector (provided with positioner)

Controller (joystick controller, rack mount controller, etc.)

Controller Manual (provided with controller)

Accupoint Positioners Operator's Manual (this manual)

Power/Data Cable (used to connect positioner to the controller and power supply)

Some combination of the following:
o Positioner Power Supply (used in systems with AC input power)
o Step Up Converter (used in systems with 12VDC input power)
o Step Down Converter

Barrel Connector (2.1mm) (used to connect the controller to a 12VDC power supply)

2.4 Unpacking

Unpack as follows:
1. Carefully open the box(es) and unpack all components.
2. Check for any damage from shipping. If damage has occurred, notify the carrier.
3. Ensure that all required tools are readily available.
PM-01010-REV 2
May 2022
Table 2-1 Tools and Materials Recommended for Installation
Tools and Materials
Safety Gloves
Wrenches
Crimping Tools
Soldering Kit
Accupoint Positioners
Safety Shoes or Combat
Boots
Screwdrivers
Mounting Hardware (Payload)
Mounting Hardware (Pedestal)
2-29