Will Burt ACCUPOINT AP-8 Operator's Manual page 46

Menu
When used with menu functions, the joystick controller functions as follows:

Push the joystick forward to move up the menu

Pull the joystick back to move down the menu

When the joystick is moved to the right, the menu will go to the sub menu or save the
setup

When the joystick is moved to the left, the menu will be exited
Panning and Tilting
When moving the positioner with the joystick, arrows pointing in the direction of the
movement will display in the lower right corner of the LCD screen. The greater the lean of
the joystick, the faster the movement.
When panning and tilting, the joystick functions as follows:

When the joystick is pushed forward, the positioner will tilt back (Pointing the payload
up). An arrow will appear pointing forward (

When the joystick is pulled back, the positioner will tilt forward (Pointing the payload
down). An arrow will appear pointing back (

When the joystick is moved to the right, the positioner will rotate clockwise to the
right. An arrow will appear pointing right (

When the joystick is moved to the left, the positioner will rotate counterclockwise to
the left. An arrow will appear pointing left (

It is possible to simultaneously pan and tilt the positioner by moving the joystick
towards a diagonal. Arrows for both applicable directions will appear on the LCD
screen. For example, when tilting forward and panning right, both an arrow pointing
up and an arrow pointing right will appear (
The positioner will continue to move in the direction given by the joystick until the joystick is
released or centered, or the positioner reaches one of its limits.
3-44
Accupoint Positioners
▲ ) on the LCD screen.
) on the LCD screen.
▼
► ) on the LCD screen.
◄ ) on the LCD screen.
▲ ).
►
PM-01010-REV 2
May 2022