Will Burt ACCUPOINT AP-8 Operator's Manual page 35

3. Powered with 110VAC (50 or 60 Hz) or 240VAC (50 or 60 Hz)
Powered with 12VDC:
If the input power supply is 12VDC, the system will require:

A 12VDC to 24VDC step-up converter (P/N: 208012) to power the positioner

5 Amp Fuse
Figure 2-6 provides a quick overview of the wiring for a system powered with 12VDC input.
12VDC
Power
Supply
Powered with 24VDC:
If the input power supply is 24VDC, the system will require:

2 Amp Fuse
Figure 2-7 provides a quick overview of the wiring for a system powered with 24VDC input.
24VDC
Power
Supply
PM-01010-REV 2
May 2022
5 Amp Fuse
(P/N: 208012)
Figure 2-6 Powered with 12VDC
2 Amp Fuse
Figure 2-7 Powered with 24VDC
Step Up
Converter
Pelco D
Compatible
Controller
Pelco D
Compatible
Controller
Accupoint Positioners
Power
Wires
Positioner
Control
Wires
Power
Wires
Positioner
Control
Wires
2-33