Usb To Rs485 Converter; Power/Data Cable - Will Burt ACCUPOINT AP-8 Operator's Manual

1.6.4 USB to RS485 Converter

The USB to RS485 converter converts USB to serial RS485 to allow users to control their
Accupoint Positioner using a Laptop/PC with an installed Graphic User Interface (GUI).

1.6.5 Power/Data Cable

The power/data cable (Figure 1-13) consists of (2) 0.75mm
control wires and (1) earth/shield wire. The cable ships with a 90° 7way connector installed
on one end and flying leads with 0.75mm
ferrules can be cut if the customer requires a shorter length.
90° 7-way
Connector
1-24
Figure 1-12 USB to RS485 Converter
2 ferrules on the other end. The end with the wire
Figure 1-13 Power/Data Cable
Accupoint Positioners
power wires, (2) 0.75mm
2
Flying Lead
with ferrules
PM-01010-REV 2
2
May 2022