I
PI-35
OSITION
T
P
2.2 Installation Tools
Table 2-1 lists tools and materials recommended for installation.
Safety Glasses
Hard Hat or Helmet
Wire Cutter / Stripper
Level
Thread-Locking Compound or Locking Hardware
2.3 Components
When unpacking, check to ensure all ordered components have arrived. The components your
system includes will vary based upon your order.
Possible components include:
Positioner
Controller
Controller Manual (ships with controller)
PositionIt PI-35 Operator's Manual (this manual)
Power/Data Cable (used to connect positioner to the controller and the power supply)
Some combination of the following:
o Positioner Power Supply (used in systems with AC input power)
o Step Up Converter (used in systems with 12 VDC input power)
o Step Down Converter (used in systems with 24 VDC input power)
Barrel Connector (2.1 mm) (used to connect the controller to the power supply)
2.4 Unpacking
Unpack as follows:
1. Carefully open the box(es) and unpack all components.
2. Check for any damage from shipping. If damage has occurred, notify the carrier.
3. Ensure that all required tools are readily available.
2-2
Table 2-1 Tools and Materials Recommended for Installation
Tools and Materials
Safety Gloves
Wrenches
Crimping Tools
Soldering Kit
Safety Shoes or Combat Boots
Screwdrivers
Mounting Hardware (Payload)
Mounting Hardware (Pedestal)
TP-5406201-B
July 2017