Step Down Converter; Barrel Connector (2.1Mm) - Will Burt ACCUPOINT AP-8 Operator's Manual

Accupoint Positioners
Figure 1-15 Step Up Converter

1.6.6.3 Step Down Converter

The step-down converter (P/N: 208017) (Figure 1-16) is used in systems with 24VDC input
power to step down the power to 12VDC to power the joystick controller if the AC power
supply supplied with the joystick is not used to provide power.
Figure 1-16 Step Down Converter

1.6.6.4 Barrel Connector (2.1mm)

The 2.1mm barrel connector (P/N: 5195601) (Figure 1-17) can be used to connect the
joystick controller to the step-down converter or 12VDC power source.
Figure 1-17 Barrel Connector
1-26 PM-01010-REV 2
May 2022