Rack Mount Controller - Will Burt ACCUPOINT AP-8 Operator's Manual

1.5.2.2 Rack Mount Controller

The Rack Mount Controller is a 2U profile rack mount designed to suit a standard 482.6mm
(19 in) rack mount.
Table 1-7 Rack Mount Controller Specifications for use with Positioners
Input Voltage
Output Data
Weight
Operational Temperature Range
Base Dimensions
Front Panel Dimensions
Mounting Hole Pattern
See Rack Mount Controller Manual (PM-01005) for more information
The rack mount will operate both Gen1 Positioners (such as RX Bowler, Topper, Homburg)
and Gen 2 Positioners (such as the Accupoint Range). When using a Gen2 Positioner it is
recommended to use 9,600 baud rate for best possible performance in most applications.
1-20
Specification
110 – 240VAC, 50/60 hz (24vDC version available)
Pelco D protocol over RS485 (2 wire), 2400, 4800,
9600 Baud Rate
< 2.65 kg (5.8 lb.)
-20 to 50°C (-4 to 122°F)
301mm L x 428mm W
88mm H x 483mm W
465mm x 76.2mm
Accupoint Positioners
PM-01010-REV 2
May 2022