Positioner Power Supply; Ac/Dc Converter; Step Up Converter - Will Burt ACCUPOINT AP-8 Operator's Manual

Table 1-6 provides the part numbers for the standard cables.

1.6.6 Positioner Power Supply

1.6.6.1 AC/DC Converter

The positioner power supply (P/N: 208016) (Figure 1-14) is used in systems using 110VAC
(50 or 60 Hz) or 240VAC (50 or 60 Hz) to convert the AC power to 24VDC input power for
the positioner. The power supply has short circuit, overcurrent, overvoltage, and over
temperature protections. It is an IP67 design and is suitable for dry, damp, or wet locations.

1.6.6.2 Step Up Converter

The step-up converter (P/N: 208012) (Figure 1-15) is used in systems with 12VDC input
power to step up the power to 24VDC for the positioner.
PM-01010-REV 2
May 2022
Table 1-10 Standard Accupoint Power/Data Cables
Will-Burt
Part Number
610/05175
610/05182
610/05183
Figure 1-14 Positioner Power Supply
Accupoint Positioners
Length
10m (33 ft)
20m (66 ft)
30m (98 ft)
1-25