Specifications - Will Burt ACCUPOINT AP-8 Operator's Manual

1.5 Specifications

Table 1-1 lists the part numbers for Accupoint Positioners in different finish variants.
Table 1-2, Table 1-3 & Table 1-4 lists the specifications for the Accupoint Positioners.
Table 1-5 & Table 1-6 list the specification for the Joystick Controller
Table 1-7, Table 1-8 & Table 1-9 lists the specifications for Rack Mount Controller
For various positioner models, add-on features can be added to improve performance such
as gas struts for additional payload capacity, heaters for lower temperature operation,
alternative gear boxes for reduced/increased rotational speeds and more. Contact WB
Customer Service for more information.
Description
AP-8 (Over the Top Mount)
AP-8 (Side Mount)
AP-8 (Antenna Mount)
AP-30 (Over the Top Mount)
AP-30 (Side Mount)
AP-30 (Antenna Mount)
AP-50 (Over the Top Mount)
AP-50 (Side Mount)
AP-50 (Antenna Mount)
1-12
Table 1-1 Accupoint Positioner Part Numbers
Duty / Application
Max 8ft lb on Tilt - Static
Max 8ft lb on Tilt - Static
Refer to Antenna mount specification
Max 30ft lb on Tilt - Static
Max 30ft lb on Tilt - Static
Refer to Antenna mount specification
Max 50ft lb on Tilt - Static
Max 50ft lb on Tilt - Static
Refer to Antenna mount specification
Accupoint Positioners
Part Number Goose
Grey (Std)
LF2/51/TX/XXX/RX2-00
LF2/51/SX/XXX/RX2-00
LF2/51/AX/XXX/RX2-00
MF2/83/TX/XTX/RX2-00
MF2/83/SX/XTX/RX2-00
MF2/83/AX/XTX/RX2-00
HF2/62/TX/XDX/RX2-00
HF2/62/SX/XDX/RX2-00
HF2/62/AX/XDX/RX2-00
PM-01010-REV 2
May 2022