Will Burt ACCUPOINT AP-8 Operator's Manual page 55

Symptoms
Positioner Pans or Tilts Improperly
Positioner pans or tilts
in the wrong direction.
Symptoms
Cannot Access the Controller Menu
The operator cannot
access the controller
menu.
Stuck in Controller Menu
While in menu functions,
the operator cannot exit
a menu.
PM-01010-REV 2
May 2022
Possible Cause
Pan and Tilt invert settings
may be wrong
Table 5-2 Troubleshooting the Controller
Possible Cause
The controller is not
receiving power and the
display screen is off.
The [Menu] button does
not respond as quickly as
other buttons.
The method to exit
individual menus varies.
Accupoint Positioners
Remedy
Query the pan and tilt using the
set up GUI, check the status of
the Pan / Tilt invert. If incorrect,
change.
Remedy
Power on the system.
Check Controller Manual Wiring
Hold the [Menu] button down for
at least (2) seconds.
Move the joystick to the left to
back out of the menu.
Press the [Prev] button to back
out of the menu.
Look for an <Exit menu> option.
Select that option.
Disconnect and reconnect power
to the controller.
5-53