Installation Tools; Components; Unpacking; Table 2-1 Tools And Materials Recommended For Installation - Will Burt POSITIONIT PI-150 Operator's Manual

I PI-150
P OSITION T AND

2.2 Installation Tools

Table 2-1 lists tools and materials recommended for installation.
Safety Glasses
Hard Hat or Helmet
Wire Cutter / Stripper
Level
Thread-Locking Compound or Locking Hardware

2.3 Components

When unpacking, check to ensure all ordered components have arrived. The components your
system includes will vary based upon your order.
Possible components include:
•
Positioner (PI-150 or PI-75)
•
Controller
•
Controller Manual (ships with controller)
•
PositionIt PI-150 and PI-75 Operator's Manual (this manual)
•
Power/Data Cable (used to connect positioner to the controller and the power supply)
•
Some combination of the following:
o Positioner Power Supply (used in systems with AC input power)
o Step Up Converter (used in systems with 12 VDC input power)
o Step Down Converter (used in systems with 24 VDC input power)
•
Barrel Connector (2.1 mm) (used to connect the controller to the power supply)

2.4 Unpacking

Unpack as follows:
1. Carefully open the box(es) and unpack all components.
2. Check for any damage from shipping. If damage has occurred, notify the carrier.
3. Ensure that all required tools are readily available.
2-2
PI-75

Table 2-1 Tools and Materials Recommended for Installation

Tools and Materials
Safety Gloves
Wrenches
Crimping Tools
Soldering Kit
Safety Shoes or Combat Boots
Screwdrivers
Mounting Hardware (Payload)
Mounting Hardware (Pedestal)
TP-5129001-J
January 2022