Powered with 110VAC (50 or 60 Hz) or 240VAC (50 or 60 Hz):
If the input power supply is 110-240VAC 50/60Hz, the system will require:
A power supply (P/N: 208016) for the positioner
2 Amp Fuse
If the customer is using AC input power and the power supply (P/N: 208016), the customer is
responsible for installing a plug (customer-supplied) based on their region. The power supply
ships with flying leads to connect to the appropriate customer supplied plug.
Figure 2-8 provides a quick overview of the wiring for a system powered with AC input.
110/240VAC
Input Power
2.6.3 Power/Data Pinout
Figure 2-9 shows the appropriate pin out diagram for wiring the 90° 7-way connector that
connects to the positioner connector.
2-34
110-240VAC
to 24VDC
2 Amp Fuse
Power Supply
(P/N: 208016)
Figure 2-8 Powered with 110-240VAC 50/60 Hz
Figure 2-9 Cable Pinout
Pelco D
Compatible
Controller
Accupoint Positioners
Power
Wires
Positioner
Control
Wires
PM-01010-REV 2
May 2022