Panel Mount Controller Assembly (Optional); Figure 6-2 Panel Mount Controller (P/N: 4270601) - Will Burt POSITIONIT PI-150 Operator's Manual

I PI-150
P OSITION T AND

6.2 Panel Mount Controller Assembly (optional)

Will-Burt offers an optional panel mount controller assembly (P/N: 4270601) for the positioner.
The panel mount controller assembly requires the communications bridge board interface (P/N:
5090411) (section 6.1). Electronic limit stops cannot be programmed using the bridge board
with contact switch arrangement. The default joystick controller (P/N: 5098901) must be used to
program the electronic limit stops.
The membrane controller operates as follows:
•
The (4) PAN/TILT arrow buttons pan the positioner left (◄) and right (►), and tilt the
positioner up (▲) and down (▼).
•
STOW moves the positioner into the stowed position.
•
UNSTOW moves the positioner into the unstowed position.
The following buttons are not used:
•
HIGH SPEED
•
LOW SPEED
•
MAST UP
•
MAST DOWN
6-4
PI-75

Figure 6-2 Panel Mount Controller (P/N: 4270601)

TP-5129001-J
January 2022