Specifications; Table 1-1 Positioner Specifications; Table 1-2 Default Joystick Controller (P/N: 5098901) Specifications - Will Burt POSITIONIT MM233TX2TXRX2 Operator's Manual

I P
OSITION T OSITIONERS
P

1.5 Specifications

Table 1-1 lists specifications for the positioner. Table 1-2 lists specifications for the default
joystick controller.
Payload Capacity
Overall Height
Overall Width
Weight
Operating Temperature
Pan Degrees of Rotation
Tilt Degrees of Rotation
Pan Speed (Proportional)
Tilt Speed (Proportional)
Backlash
Repeatability
Maximum Continuous
Power
Maximum Continuous
Current
Input Voltage
Protocol
Ingress Protection Rating
Baud Rate

Table 1-2 Default Joystick Controller (P/N: 5098901) Specifications

Input Voltage
Rating Power
Communication Interface
Communication Frequency
Operating Temperature
Dimensions (W x H x L)
Weight
Protocol
1-4

Table 1-1 Positioner Specifications

PI-35
35 ft.-lb. (47 Nm) 75 ft.-lb. (101 Nm)
9.8 in. (248mm) 11.32 in. (287.7
10.8 in. (273mm) 9.7 in. (246.0 mm)
21 lb. (9.5kg)
-40°F to 140°F (-40°C to 60°C)
1 to 12° / second
1 to 12° / second
Pelco D used (Pelco P available)
Specifications
12 VDC
0.5 watts
RS485
2,400 bps used (4,800; 9,600; 19,200 bps available)
32°F to 122°F (0°C to 50°C)
5.4 x 4.2 x 6.6 in. (136 x 105 x 168 mm)
0.89 lb. (0.40 kg)
Pelco D used
PI-75
150 ft.-lb. (202
11.32 in. (287.7
mm)
12.4 in. (314.0
35 lb. (15.9 kg) 37 lb. (16.8 kg)
± 400° (± 200°)
180° (± 90°)
1 to 6.5° / second
1 to 5.5° / second
≤ 0.15°
≤ 0.3°
44 W
1.85 amps
24 VDC
IP68
2,400 bps
PI-150
Nm)
mm)
mm)
PM-01011-A
October 2023