Specifications; Table 1-1 Positioner Specifications; Table 1-2 Default Joystick Controller (P/N: 5098901) Specifications - Will Burt PositionIt PI-35 Operator's Manual

I PI-35
OSITION T
P

1.5 Specifications

Table 1-1 lists specifications for the positioner. Table 1-2 lists specifications for the default
joystick controller.
Functional Characteristic
Payload Capacity
Overall Height
Overall Width
Approximate Weight
Operating Temperature
Pan Axis
Tilt Axis
Pan Speed (Proportional)
Tilt Speed (Proportional)
Backlash
Repeatability
Maximum Continuous Power
Maximum Continuous Current @ 24 VDC
Input Voltage
Protocol
Ingress Protection Rating
Baud Rate
All dimensions and parameters are for reference only and are subject to change without notice.

Table 1-2 Default Joystick Controller (P/N: 5098901) Specifications

Functional Characteristic
Input Voltage
Rating Power
Communication Interface
Communication Frequency
Operating Temperature
Dimensions (W x H x L)
Weight
Protocol
All dimensions and parameters are for reference only and are subject to change without notice.
1-4

Table 1-1 Positioner Specifications

(Converters available for 12 VDC and AC power sources.)
Pelco D used (Pelco P available)
IP68 for dust and water intrusion
Specification
12 VDC
0.5 watts
RS485
2,400 bps used (4,800; 9,600; 19,200 bps available)
32°F to 122°F (0°C to 50°C)
5.4 x 4.2 x 6.6 in. (136 x 105 x 168 mm)
0.89 lb. (0.40 kg)
Pelco D used
Specification
35 ft.-lb. (47.4 Nm)
9.8 Inches (248 mm)
10.8 Inches (273 mm)
21 lb. (9.5 kg)
-4° to 122°F (-20° to 50°C)
355° (± 177.5°)
180° (±90°)
1 to 12° / Second
1 to 12° / Second
<0.15°
<0.3°
44 W
1.85 A
24 VDC
2,400 bps
TP-5406201-B
July 2017