Final Steps - Vertiv NetSure-48 VDC Installation And User Manual

Vertiv™ NetSure™ -48 VDC Bulk Output Rectifier System Installation and User Manual

9.7 Final Steps

Procedure
1. If any controller configuration settings were changed, refer to the NCU Instructions (UM1M830BNA) and save a copy of the
configuration file. This file can be used to restore the controller settings, if required, at a later date.
NOTE!
Provided on a USB drive furnished with the system is a controller configuration drawing (C-drawing) and the
controller configuration files loaded into the controller as shipped.
2. Verify all rectifier modules and the controller are fully seated, latched, and the latch handle screws secured.
3. Verify there are no external alarms and the local indicators are as shown in Table 9.2.
10 Operating Procedures
10.1 Controller and Rectifier
For operation instructions on these units, refer to the following documents.
•
NCU Controller Instructions (UM1M830BNA)
NOTE!
The controller's default "User Name" is "admin" and the default "Password" is "640275".
•
Rectifier Instructions (UM1R482000e3)
10.2 Local Controls and Indicators
Controller and Rectifier
Refer to the controller and rectifier instructions for descriptions of the local controls and indicators located on these units.
11 Maintenance
11.1 System Maintenance Procedures
It is recommended to perform the maintenance procedures listed in Table 11.1 every 6 months to ensure continual system operation.
Table 11.1 Maintenance Procedures to be Performed at 6-Month Intervals
Procedure
Check ventilation openings for obstructions such as dust, papers,
manuals, etc.
Inspect and tighten all installer's connections.
11.2 Adding a Rectifier
To increase system current capacity, a rectifier module can easily be added if an empty rectifier module mounting position is available.
Refer to Rectifier Instructions UM1R482000e3 for a rectifier installation procedure.
26
Referenced In
--
Installation
section of these
instructions.
Proprietary and Confidential © 2022 Vertiv Group Corp.