Restarting And Resetting - Siemens SIMATIC CloudConnect CC7 Series Operating Instructions Manual

Diagnostics and maintenance

5.3 Restarting and resetting

5.3 Restarting and resetting
Functions and execution
The following functions are available for resetting:
● Restart
The configuration data is retained.
The gateway performs a restart.
You can perform the function via:
– WBM: "Maintenance > Communication / Restart"
● Reset to factory settings
The configuration data is deleted.
The data on an optional CLP are deleted as well.
The gateway performs a restart.
You can perform the function via:
– "SET" button
– WBM: "Maintenance > Communication / Restart"
Restart
The gateway ends productive operation, restarts automatically and takes up productive
operation again with the existing configuration data.
Resetting to factory settings: Effect
Note
Data is deleted
With the resetting to factory settings, all configuration data and process data on the gateway
is deleted.
With a reset to factory settings, the gateway can only be reached over the factory default
address data.
122
To operate the button, refer to the section The button "SET" (Page 28).
Operating Instructions, 10/2019, C79000-G8976-C503-02
SIMATIC CC7