Table of Contents
Advertisement
4.11.7
Diagnostics
Diagnostic messages
This page contains diagnostics messages for internal events and errors.
● Update
Here you set whether and in which cycle the WBM updates the displayed diagnostic
messages.
The entries contain a time stamp and the message text.
● Notes are displayed in blue.
● Warnings are displayed in red.
Examples of events:
- Startup
- Establishment/termination of a communications connection
- Change to the configuration
4.11.8
Logging
Use of logging
By using the logging functions in log files, you can export important events to a file.
● Export
Click the button to export the respective file to the PC file system.
The exported files are displayed in the footer of the WBM. You can open the files from the
PC file system or directly from the WBM tab.
Export log files
● Trace
During runtime, information about important events is automatically saved. This data
contains information on the configuration, active procedures and error situations.
You should only use logging of events if you have problems with the application that you
cannot solve yourself.
Using the "Export" button, you can save this data in a logging file (*.enc).
The information in this unreadable file is encrypted and can only be read by Siemens
Industry Online Support. Send the log file back to your contact at Siemens Industry
Online Support.
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
Configuration
4.11 Maintenance
119
Advertisement
Table of Contents
