Table of Contents
Advertisement
Device Management
3.2 Configuring the Device
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM ROS interface. For more
information about configuring the device, refer to the "RUGGEDCOM RS8000H
Configuration Manual" associated with the installed software release.
3.3
Resetting the Device
The RUGGEDCOM RS8000H can be reset (rebooted) using the RESET button. The
RESET button is recessed and can only be reached using a pin or small screwdriver.
To reset the device, quickly press and release the RESET button with a pin.
18
RUGGEDCOM RS8000H
Installation Manual, 11/2022, C79000-G8976-1022-07
Advertisement
Table of Contents
Need help?
Do you have a question about the SIMATIC NET RUGGEDCOM RS8000H and is the answer not in the manual?
Questions and answers