Table of Contents
Advertisement
4.4.3
Log out
Manual logout using the
You log out from the WBM by clicking on this button in the toolbar.
The connection to the device is terminated. All changes to the configuration data not saved
previously are lost.
Automatic logout after timeout
After 600 seconds without saving or changing the WBM page, you are logged out and
disconnected from the WBM. In this case, you must log in again.
In the WBM toolbar you can see the counter in the upper right-hand corner which displays
the remaining time of the current session. By clicking the time display, the counter of the
session duration is reset and the time of the session duration starts all over again.
4.5
Start page
4.5.1
Info
The page provides an overview of important status and configuration data of the device.
Status
● Operating state
Operating state of the device
● Process communication
Shows the status of the communication with the process stations.
● System runtime (dd-hh-mm-ss)
Time since the last startup (dd-hh-mm-ss)
● Serial number
Serial number of the device
● Article number
Article number of the device
● Hardware product version
Hardware product version of the device
● U-Boot version
Current U-Boot version for the firmware bootloader
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
button
Configuration
4.5 Start page
55
Advertisement
Table of Contents
