Table of Contents
Advertisement
Configuration
4.10 Data points
However, multiple data points can be created for different target systems with reference to
the same address in the CPU.
● Select station
Select a station from the drop-down list whose data points you want to configure for the
transfer. The drop-down list contains all stations that were configured under "Process
access", see section Station configuration (Page 63).
If data points are already configured for a station, these are displayed in the table below
when selecting the station. You can change the data later.
● Add data point
Creates the row for a new data point in the table.
Alternative:
● Duplicate row
You can also create new data points by copying existing data points.
To do so, select one or more data points using the check boxes (see below) and click the
"Duplicate row" button.
Then adjust the properties of the copied data points.
● Multi-editing
You use this button to open the "Data point configuration" dialog. You can set specific
parameters for all or previously selected data points in one editing step in the dialog.
Select multiple data points for this function using the check box in the selection column
(left) of the data point table.
You can set the following parameters for multiple data points in the dialog:
– Target
– Access
– Trigger
For the meaning of the parameters, see below.
Multi-editing is practical especially when you are importing large volumes of data points
which are to receive the same values for the specified parameters.
After configuring the specified parameters in the "Data point configuration" dialog, click on
the respective check boxes of the parameters in the dialog. Only these parameters are
set.
You can then assign the parameter values to the data points:
– Set for selected
– Set for all
102
Assigns the parameter values to those data points that you selected before opening
the dialog.
Assigns the parameter values to all data points of the data point table.
Operating Instructions, 10/2019, C79000-G8976-C503-02
SIMATIC CC7
Advertisement
Table of Contents
