Siemens SIMATIC CloudConnect CC7 Series Operating Instructions Manual page 79

Settings
● Cloud provider
Select your service provider.
Selecting the cloud provider also affects the parameters of the topic configuration; see
also section Configuring topics (Page 84).
By selecting the cloud provider, you determine whether topics or groups are configured
for the data transmission:
– AWS / Azure / IBM Cloud
– MindConnect IoT Extension
– Other Cloud
● Protocol
Select the desired protocol from the drop-down list.
● Enable profile
Enables the currently selected profile for configuration and for use in productive
operation.
When changing the profile, for example, if you want to change the cloud provider, you
must first disable the previously enabled profile and save it. Only then can you enable a
different profile.
You configure access of the device to the cloud in the additional tabs of this page.
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
You can create several topics. A topic can contain multiple data points.
You can create several groups. A group can contain multiple data points.
In IoT Extension, a group corresponds to the structure characteristic "Series".
In the default setting, all groups are assigned to the preset standard topic "s/us".
Note
Name change of the assigned topic "s/us"
If you give a different name to the assigned topic in the configuration, please note that
it may not be possible for the data to be evaluated by IoT Extension.
You can create several groups. A group can contain multiple data points.
In the default setting, all groups are assigned to a topic. You can also assign different
groups to different topics.
If you do not wish to use groups, create only a standard group and delete the entry
"<GROUP_NAME>" in the user data editor.
Configuration
4.9 Cloud configuration
79