Table of Contents
Advertisement
Configuration
4.9 Cloud configuration
● Topic
⇒ Validity: AWS / Azure / IBM Cloud
Text box with filter
When entering individual characters, all topics that start with the entered characters or
contain these characters are shown. Click on an entry to assign the data point.
If you have used bundled assignment (see above), the assigned topic names are already
shown.
● Group
⇒ Validity: MindConnect IoT Extension / Other Cloud
Text box with filter
When entering individual characters, all groups that start with the entered characters or
contain these characters are shown. Click on an entry to assign the data point.
If you have used bundled assignment (see above), the assigned group names are
already shown.
● Attribute
⇒ Validity: MindConnect IoT Extension / Other Cloud
The attribute is applied to the user data as <ADDITIONAL_ATTRIBUTE>; see section
User data format (Page 89).
Enter the attribute according to the requirements of the cloud provider:
– Other Cloud: Optional
– IoT Extension: Mandatory
With a connection to IoT Extension, the attribute is interpreted as a label of the physical
units of the respective data point. The standard units are:
– C = Temperature in degrees Celsius
– P = Pressure in bars
– mm = Length in millimeters
– km/h = Speed in km/h
– m/s2 = Acceleration in m/s
– % = Size in percent
– %RH = Relative humidity in percent
– A = Current in amperes
– V = Voltage in volts
– W = Power in watts
– kWh = Energy in kilowatt hours
96
If no attribute is demanded or required, leave the box empty.
2
Operating Instructions, 10/2019, C79000-G8976-C503-02
SIMATIC CC7
Advertisement
Table of Contents
