Enabling Or Disabling Autoscroll; Resetting The Feature Keys To The Defaults; Carrier Voip; Nortel Ip Phone 2001 User Guide (Cicm - Nortel IP Phone 2001 User Manual

Enabling or disabling AutoScroll

If the AutoScroll feature is enabled, the IP Phone automatically directs you
to the screen for the active feature. For example, if your second soft key
is configured on screen two, and you get a call to that number, the feature
screens scroll to page two. You can answer the call immediately without
searching for the screen.
Prerequisites
You must be logged on.
Procedure Steps
Step
1
2
3
4
5
6
7
8

Resetting the feature keys to the defaults

Follow this procedure to reset the keys to the default settings.
Prerequisites
You must be logged on.
Copyright © 2008 Nortel Networks
.
The key type is assigned and a check mark appears beside the
item to indicate that type is active. You return to the Feature
screen.
Action
From the main menu, open the Settings menu.
From the Settings menu, open the Call menu.
From the Call menu, open the Feature menu.
From the Feature menu, select Assign.
From the Assign menu, select AutoScroll.
Press Ok.
The AutoScroll screen appears.
Perform one of these steps.
•
To enable AutoScroll, select Enable.
•
To disable AutoScroll, select Disable.
Press Ok.
A check mark appears beside the item to indicate your choice.
You return to the Assign menu.

Carrier VoIP

Nortel IP Phone 2001 User Guide (CICM)

NN10300-005 09.01 Standard
4 July 2008
Resetting the feature keys to the defaults 63
--End--
--End--