First Time Use; General Operating Principle; Quick Start & Power On; User Interface - Kane KANE458s Manual

FIRST TIME USE

5
Charge your analyser batteries for 8 hours - an overnight charge should be
sufficient for an average 8-hour day.
Take time to read this manual fully and be aware your analyser configuration
may not support all features explained in this manual.
Before using your analyser ensure it is setup for your requirements.
NOTE: Your analyser STATUS bar displays current time, date and
battery status - Time & date can only be changed with no stored logs in
memory to protect integrity of stored logs.

GENERAL OPERATING PRINCIPLE

6
Using your analyser is simple with the rotary dial and user interface.
Most tests can be made with little user activity.
Your analyser status bar offers options based on tasks you are
performing and displays useful information and messages.
6.1
QUICK START & POWER ON
Your analyser has two power on modes: Quick Start & Combustion analysis.
For quick start, rotate dial to any position not starting combustion analysis e.g:
MENU, STATUS, TEMP/PRS.
Your analyser will give quick access to non gas measurement functions.
Rotating dial to a position to measure gas starts auto zero calibration.
Power on analyser with dial set to any position starting combustion analysis
starts auto zero calibration.
Power on analyser by pressing
NOTE: Always power on analyser in fresh outdoor air.

USER INTERFACE

6.2
Your analyser displays 5 lines of tests & a status bar.
The display backlight power on with each button press then powers off after 10
seconds.
Navigate through options and menu choices via
button for 2 seconds.
or & ENTER.
KANE458s MANUAL 13