First Time Use; General Operating Principle; Quick Start; User Interface - Kane KANE958 Manual

Flue gas analyser with direct o2 measurement and co sensor protection

Table of Contents

FIRST TIME USE

Charge your analyser batteries for 8 hours - an overnight charge

should be sufficient for an average 8 hour day.

Take time to read this manual fully and be aware your analyser

configuration may not support all features explained in this manual.

Before using your analyser ensure it is set up for your requirements.

NOTE: Your analyser STATUS bar displays current time, date and

battery status - Check time & date are correct as they can only be

changed if you have not stored logs in Memory to protect the

integrity of your stored data.

Using your KANE958 is simple with the rotary dial and user interface.

Most tests can be made with little user activity.

Your analyser status bar offers options based on tasks you are

performing and displays useful information and messages.

Turn on your analyser in fresh outdoor air pressing the

button for 2

seconds. Your analyser starts a 60 second zero calibration - once

completed select your tests by turning the analyser rotary dial.

Your analyser display shows 5 lines of tests & a status bar. The

backlight activates on each button press then turns off after 10 seconds.

Navigate through your options and menu choices via 3 dedicated

buttons.

Button presses are either short or long.

KANE958 MANUAL 11

Table of Contents