Measuring Flue Gases - Kane KANE458s Manual

MEASURING FLUE GASES

8
After countdown is finished and your analyser is correctly set up, put flue
probe into appliance sampling point.
Probe tip should be in flue centre - use flue probe depth stop cone to set
position.
With balanced flues, ensure probe is positioned far enough into flue so no air
can "back flush" into probe.
SAFETY WARNING
Ensure flue probe handle does not get hot!
Do not exceed analyser operating specifications - In particular:
Do not exceed flue probe maximum temperature (600°C)
•
Do not exceed analyser internal temperature operating range
•
Do not put analyser on hot surfaces
•
Do not exceed water trap levels
•
Do not let analyser particle filter become dirty and blocked
•
Check readings are stable and within expected range.
KANE458s MANUAL 23