First Time Use; Menu List - Kane KANE975 Manual

FIRST TIME USE

Charge the battery for 12 hours. Following this, an overnight charge
should be sufficient for an average 8-hour day.
Take time to read the manual fully, be aware that the analyser
configuration that you have purchased may not support all the
features detailed in this manual.
When using the analyser for the first time you will need to set it up to
your requirements.

MENU LIST

Press HOME to display MENU list.
MENU ITEM
STATUS
SETUP
ANALYSER UNITS
ALARM
SCREEN
REPORTS
TRENDS
SERVICE
MANUAL AIR ZERO
MANUAL PRS ZERO
NOTE: At the bottom of the screen the current time, date and battery
status are displayed. Check time and date are correct, they can only be
changed if there are NO logs in Memory. This protects the integrity of
the logged data.
Current instrument status, software version etc.
Menu to change analyser settings.
Change measurement parameters.
Configure the alarms for the analyser.
Configure the display.
Configure logging parameters and view stored data.
Configure and display Trend information.
Manually trigger a Air Zero purge.
Manually trigger a zero calibration for the pressure sensor.
COMMENTS
Reserved.
Page 12