Table of Contents
Advertisement
BATTERIES
4
BATTERY TYPE
4.1
Your analyser uses rechargeable Nickel Material Hydride (NiMH)
batteries.- Using other battery types may void your analyser warranty.
WARNING
You can use Alkaline batteries but do not charge analyser when fitted.
Do not mix NiMH cells with different capacities or from different
manufacturers - All batteries must be identical.
REPLACING BATTERIES
4.2
Turn over analyser & remove protective rubber cover to find battery
compartment.
Fit 3 NiMH "AA" rechargeable batteries ensuring correct battery polarity.
Replace battery cover & protective rubber cover.
UPDATING TIME AND DATE
4.3
Reset analyser time & date after changing batteries.
CHARGING NiMH BATTERIES
4.4
Your analyser uses a standard Micro USB connector - For best results
power off before connecting charger. Charging indicator illuminates then
flashes off when charging is complete.
First charge for 8 hours - Thereafter NiMH batteries can be topped up any
time, even for short periods
If batteries discharge and analyser enters low power shutdown, 1 hour
charge provides approx. 2 hours continuous use.
BATTERY DISPOSAL
4.5
Always dispose of depleted batteries using approved disposal methods that
protect the environment.
12 KANE458s MANUAL
Advertisement
Table of Contents
