Kane458S Overview & Kane Link - Kane KANE458s Manual

Flue gas analyser with direct co2 measurement and co sensor protection
Hide thumbs Also See for KANE458s:
Table of Contents

Advertisement

KANE458s OVERVIEW & KANE
1
Your KANE458s flue gas analyser measures:
Carbon Monoxide (CO)
Carbon Dioxide (CO2)
Differential Pressure
Differential Temperature
Depending on configuration it also measures or calculates:
Oxygen (O2)
Nitric Oxide (NO) & Oxides of nitrogen (NOx)
CO/CO2 ratio
Combustion Efficiency, loses & excess air
Ambient Carbon Dioxide (CO2)
Tightness, Let by, Commission & Room Co Tests
Your analyser has:
Protective rubber cover with magnets for hands-free operation
Flue probe with integral temperature sensor
Battery charger & 3 NiMH batteries.
Low flow detection to power off pump if water enters analyser
Large 6 line display showing data & test results - Display bottom line also
highlights analyser status.
Test reports to optional infrared printer or wirelessly to KANE LIVE App.
45 log memory for any combination of Combustion, AUX, Temperature &
Pressure tests.
Memory for 25 Tightness Tests, 25 Commissioning tests & 14 ROOM CO
tests - see page 19
2 lines of 24 characters to personalise with your details.
KANE
Wirelessly connect optional KANE LINK devices to your analyser.
When powered on, they replace or add measurements your analyser makes.
See page 36 to manage optional KANE LINK devices.
6 KANE458s MANUAL
LINK
LINK

Advertisement

Table of Contents
loading

Table of Contents