Temperature & Pressure Testing; Temperature & Pressure Display - Kane KANE458s Manual

CO & AMBIENT CO2
Maximum readings are reset during power on / off cycle or CO2 re-zero.
TEMPERATURE & PRESSURE TESTING
11
11.1
TEMPERATURE & PRESSURE DISPLAY
Rotate dial to TEMP / PRS and connect type k probe thermocouple plug to
flue gas temperature socket T1.
To measure differential temperature, connect another type k probe
thermocouple plug to ambient temperature T2.
To measure flow & return temperature, use T1 for flow & T2 for temperature.
If T2 is not connected, analyser internal temperature is used to calculate net
temperature.
26 KANE458s MANUAL
Ambient CO2 reading
Maximum recorded ambient CO2 reading
Ambient CO reading
Maximum recorded ambient CO reading
Use T1 connection for flow temperature
sensor
Use T2 connection for return temperature
sensor
Real time temperature difference
Real time pressure reading
Status bar