First Time Use; General Operating Principle; Quick Start; User Interface - Kane KANE458S Manual

Flue gas analyser with direct co2 measurement and co sensor protection

Hide thumbs Also See for KANE458S:

Table of Contents

FIRST TIME USE

Charge your analyser batteries for 8 hours - an overnight charge should

be sufficient for an average 8-hour day.

Take time to read this manual fully and be aware your analyserÏ

configuration may not support all features explained in this manual.

Before using your analyser set it up for your requirements.

NOTE: Your analyser STATUS bar displays current time, date and

battery status - Check time & date are correct as they can only be

changed if you have not stored any logs in Memory to protect the

integrity of your stored data.

Using your analyser is simple with the rotary dial and user interface.

Most tests can be made with little user activity.

Your analyser status bar offers options based on tasks you are

performing, displaying useful information and messages.

Turn on your analyser pressing the

button for 2 seconds until it starts.

Your analyser starts a calibration - once completed select your tests by

turning the analyser rotary dial.

Your analyser display shows 5 lines of tests & a status bar. The backlight

activates on each button press then turns off after 10 seconds.

Navigate through your options and menu choices via

Button presses are either short or long presses.

KANE 458s MANUAL

Table of Contents