Honeywell 3G SmartVFD HVFD3D3A0015 Installation And User Manual page 100

Minimum output frequency at frequency output
Maximum output frequency at frequency output
Accuracy of frequency output
Resolution of frequency outputs
All digital outputs are galvanically isolated from the supply voltage (PELV) and other high-voltage
terminals.
1) Terminals 27 and 29 can also be programmed as input.
Table 8.24. Relay outputs.
Programmable relay outputs
Environment according to EN 60664-1
Relay 01 (Frame A, B, C)
Terminal number
Maximum terminal load1), 1-2 (NO) and 1-3
(NC)
Maximum terminal load1), 1-2 (NO) and 1-3
(NC)
Relay 01 (Frame D)
Terminal number
Maximum terminal load1), 1-2 (NO)
Maximum terminal load1), 1-3 (NC)
Minimum terminal load1), 1-2 (NO) and 1-3
(NC)
Relay 02 (All Frame Sizes)
Terminal number
Maximum terminal load1), 4-5 (NO)
Maximum terminal load1), 4-6 (NC)
Minimum terminal load1), 4-5 (NO) and 4-6
(NC)
The relay contacts are galvanically isolated from the rest of the circuit by reinforced isolation (PELV).
1) IEC 60947 part 4 and 5.
2) Overvoltage Category II.
3) UL applications 300 V AC 2 A.
31-00559-01
0 Hz
32 kHz
Max. error: 0.1% of full scale
12 bit
2
Overvoltage category III/pollution degree 2
1-2 (NO), 1-3 (NC)
240 V AC, 2A, Resistive
240 V AC, 0.2A, Inductive @ cosφ 0.4
60 V DC, 1 A, Resistive
24 V DC, 0.1A, Inductive
24 V DC, 10 mA
24 V AC, 2 mA
1-2 (NO), 1-3 (NC)
400 V AC, 2A, Resistive2), 3)
240 V AC, 0.2A, Inductive @ cosφ 0.4
80 V DC, 1 A, Resistive
24 V DC, 0.1A, Inductive
240 V AC, 2A, Resistive
240 V AC, 0.2A, Inductive @ cosφ 0.4
60 V DC, 1 A, Resistive
24 V DC, 0.1A, Inductive
24 V DC, 10 mA
24 V AC, 2 mA
4-5 (NO), 4-6 (NC)
400 V AC, 2A, Resistive2), 3)
240 V AC, 0.2A, Inductive @ cosφ 0.4
80 V DC, 1 A, Resistive
24 V DC, 0.1A, Inductive
240 V AC, 2A, Resistive
240 V AC, 0.2A, Inductive @ cosφ 0.4
60 V DC, 1 A, Resistive
24 V DC, 0.1A, Inductive
24 V DC, 10 mA
24 V AC, 2 mA
94