[ENG] NetPing 8/PWR-220 v4/SMS, User guide -[8PWR] Sockets and Indication Elements
1W Sockets
1W sockets are used to plug sensors of a model line V4, which are built on a 1Wire technology.
Power Supply Channels Status Indication
On a front panel there are LEDs that indicate a status of the second group of power supply channels. Channels 5 - 8
are included into this group. A status of each channel is represented by a corresponding LED of an OUT group. A LED
is glowing when there is a voltage on an output (a relay is closed).
220v IN OB *A LED shows from what input the second group of channels is fed. A LED glows when a power supply is
fed from an input A, which is located on a back panel of a device.
On a back panel there are LEDs that indicate a status of the first group of power supply channels. Channels 1 - 4 are
included into this group. A status of each channel is represented by a corresponding LED of an OUT group. A LED is
glowing when there is a voltage on an output (a relay is closed).
220v IN OA *B LED shows from what input the first group of channels is fed. A LED glows when a power supply is fed
from an input B, which is located on a front panel of a device.
[8PWR] Sockets and Indication Elements
–