Ifc Replacement - Regency Fireplace Products Grandview G800EH Owners & Installation Manual

IFC Replacement

I
MPORTANT : Ensure 3 prong cord is disconnected from receptacle located
on lower right hand side of appliance prior to servicing IFC.
Label all wires prior to disconnection when servicing controls. Wiring errors
can cause improper and dangerous operation. Verify proper operation after
servicing.
1. Do not begin until the unit has fulled cooled down.
2. Remove the Screen Barrier. See Section: Safety screen removal
/ Installation.
3. Remove the glass door: See Section: glass door removal /
Installation.
4. Remove the Bottom Cover Panel by rotating up and lifting out.
5. Loosen the two Phillips-head screws as shown. They do not need
to be removed.
6. Push the IFC Box back.
*Firebox hidden for
clarity*
7. Rotate the front of the IFC Box to the left.
8. Pull the IFC Box to the front of the unit with the two screws showing.
9. Remove the two screws that secure the Cover Plate to the IFC Mount.
Then remove the Cover Plate.
10. The IFC can now be slid out from under the firebox.
11. Reverse steps to reinstall.
maintenance
Grandview G800EH Gas Fireplace |
®
89