Table of Contents
Advertisement
Cool Wall Installation-Cool Wall Conversion
1. Remove six (6) screws to remove top panel.
2. Remove insulation from top of unit and discard.
3. Slide out tab as shown to remove—recycle part.
4. Insert a large slotted screwdriver into the slot in between front and back
tabs—bend the three (3) tabs up 90° towards the front.
DO NOT REMOVE TABS
5 . Bend the rear three (3) tabs up 90° towards the back of the unit.
6. Flip top panel 180° and reinstall to top of unit with four(4) screws in loca-
tions shown below.
installation
Grandview
G800EH Gas Fireplace |
®
29
Advertisement
Table of Contents
