Proflame I Remote Receiver Battery Replacement - Regency Fireplace Products Panorama P33-10 Owners & Installation Manual

PROFLAME I REMOTE RECEIVER BATTERY REPLACEMENT & BATTERY BACKUP IF 120V POWER IS
LOST WITHIN HOME
Remote Receiver/Battery Holder Battery Replacement & Battery Back up if 120 volt
power is lost witihin home
Remote Receiver Battery Replacement
How to replace/add the batteries on remote receiver.
How to replace/add the batteries on remote receiver (Proflame 1).
Note: If no fan control module is installed (included with the optional fan kit), 4 AA batteries are mandatory in the remote receiver to operate appliance when
Note : If a wall switch cover plate is installed, first remove cover plate by removing 2 small phillips head screws
using remote control.
STEP 1
STEP 2
STEP 3
STEP 4
Reinstall wall cover plate with 2 Phillips head screws.
Move both the left/right slides
as shown below.
Extract the battery
compartment from the remote
receiver/battery holder
Keeping the battery compartment
pressed in, close the left slide
The battery compartment
will be pushed out slightly,
to allow to easily extract it
Replace 4 x AA batteries and insert the battery
compartment back into remote receiver/battery holder
Close the right slide
Regency P33-10 Zero Clearance Direct Vent Gas Fireplace
®
owner's information
|
17
| 17