Table of Contents
Advertisement
Proflame I Remote Receiver Battery Replacement
Remote Receiver/Battery Holder Battery Replacement & Battery Back up if 120 volt
Remote Receiver Battery Replacement
power is lost witihin home
How to replace/add the batteries on remote receiver.
Note:4 AA batteries are mandatory in the remote receiver to operate appliance when using remote control.
The remote receiver will be located on the bottom right hand side of appliance next to the fan speed controller. The safety screen will need to be removed
How to replace/add the batteries on remote receiver (Proflame 1).
to gain access to this remote receiver.
Note : If a wall switch cover plate is installed, first remove cover plate by removing 2 small phillips head screws
STEP 1
STEP 2
STEP 3
STEP 4
Reinstall wall cover plate with 2 Phillips head screws.
Move both the left/right slides
as shown below.
Extract the battery
compartment from the remote
receiver/battery holder
Keeping the battery compartment
pressed in, close the left slide
owner's information
The battery compartment
will be pushed out slightly,
to allow to easily extract it
Replace 4 x AA batteries and insert the battery
compartment back into remote receiver/battery holder
Close the right slide
Gi29 Direct Vent Gas Insert |
65
Advertisement
Table of Contents
