Table of Contents
Advertisement
Clean Front Installation
The finishing material can be brought to the edge of the fireplace opening.
Do NOT finish beyond the opening, doing so will prevent the screen from
being attached and removed.
The Optional Clean Front Trim (Part # 761-929) is available to prevent this
from happening. See Section: C
Nailing Flange Instructions
1. Bend framing tabs 90° backward to create the framing standoff.
Framing
Tab
max.
F
t
i
i
lean
ront
rim
nstall
nstruCtions
for details.
Optional Clean
Front Trim
Optional Clean Front Trim Install Instructions
(Part # 761-929)
1.
Loosen the four (4) screws that at-
tach the right and left nailing flanges
to the unit.
2.
Slide the left and right tiling flanges
onto the front of the fireplace. Use the
slots to center with the screw securing
the Nailing Flanges.
3.
Tighten screws down.
4.
Slide the Bottom Tiling Flange against
the bottom of the fireplace. Secure with
a screw on each side.
5.
Finishing material can now be pressed
against the flat edge created by the
Clean Front Trim.
installation
Grandview
G800EH Gas Fireplace |
®
37
Advertisement
Table of Contents
