Table of Contents
Advertisement
installation
CHASE VENT INSTALLATION—COOL WALL
(PART #776-941)
Chase Vent Installation—Cool Wall
Framed opening must be at least 2 3/8" (60 mm) tall, and at least 29 3/8" (746 mm) wide to accomodate the chase vent. The
top of the chase vent opening must be 2" (51 mm) or less from the top of the chase enclosure. Fasten the chase vent with
Framed opening must be at least 3-5/8" (92mm) tall, and at least 33-3/8" (848mm) wide to accomodate the Chase vent. The top of the Chase vent opening
screws and construction adhesive.
must be flush with the top of the chase enclosure. Fasten the Chase vent with screws and construction adhesive.
If the chase vent is not being used, a minimum 58 in
If the chase vent is not being used, a minimum 107in
achieved in a number of ways including a reveal at the top of the chase.
temperatures. This can be achieved in a number of ways including a reveal at the top of the chase.
3-5/8''
(92 mm)
(60 mm)
Ceiling
920-150
920-301
32
| Grandview
G800EH Gas Fireplace
®
29
(374 cm
) opening in the enclosure is required to maintain safe operating
(690cm
2
) opening in the enclosure is required to maintain safe operating temperatures. This can be
2
2
2
29
Min. 33-3/8''
(848 mm)
(746 mm)
Side View
Ceiling
Top of enclosure
Max 2" (51 mm)
1
Side View
1
Room ceiling
IMPORTANT:
Regency
Stud
Chase Vent
Screw Holes
(Screws into
upright side
studs)
Ceiling
G600EC
G600EC/G600C
Enclosure ceiling must be ush
with ventilation opening
Max 2" (51 mm)
Enclosure ceiling
3 1/4" H x 33" W
opening
Fireplace Chase
Enclosure
08.11.20
08.25.20
G600
Advertisement
Table of Contents
