Table of Contents
Advertisement
installation
Faceplate Installation (Part # 761-922, 761-924, 761-926)
Faceplate - Finishing:
The fi nishing material can be brought to the top of the fi replace. A 1/2" gap must be maintained on the sides to allow the Faceplate to be installed. The
fi nishing material must not protrude past the front face of the fi replace. Follow the steps below to install.
See section: Nailing ange install for Nailing Flange Depth settings.
1. Bend the four mounting tabs on the outer box Front 90° forward. There
are two tabs per side.
Mounting Tabs
42
| Grandview
G800EH Gas Fireplace
®
920-152
FACEPLATE INSTALLATION
2. Bend the tabs on the left and right nailing fl anges 90° forward. There are
two tabs per nailing fl ange
.
from interfering with the faceplate mounts.
Top and Side Nailing Flange Tabs
1
These tabs are used to stop fi nishing material
08.28.19
Advertisement
Table of Contents
