Mitsubishi Electric NZ2GF-CCB User Manual page 118

(b) CC-Link data link stop/restart
CC-Link data link of the own station can be stopped or restarted using a programming tool or the remote buffer
memory. This function can be used to stop data link temporarily or for other maintenance purposes.
CC-Link data link can be stopped or restarted with remote buffer memory.
The following table lists the remote buffer memory areas used for CC-Link data link stop/restart.
Data link stop
Data link restart
116
Item
• Data link stop (5E0
• Data link stop acceptance (5E4
• Data link stop completion (5E4
• Data link stop result (645
• Data link restart (5E0
• Data link restart acceptance (5E4
• Data link restart completion (5E4
• Data link restart result (641
Address of a remote buffer memory area to be used
.b2)
H
.b4)
H
.b5)
H
)
H
.b0)
H
.b0)
H
.b1)
H
)
H