Mitsubishi Electric NZ2GF-CCB User Manual page 56

2.
Enter the setting for the bridge module.
Enter the following values for the setting of the bridge module.
Setting item
Station number
RX/RY setting
RWr/RWw setting
3.
Click the [Close with Reflecting the Setting] button.
54
Set the station number for the bridge module.
32 points  last station number on the CC-Link side (including the number of occupied
Number
of points stations)
4 points  last station number on the CC-Link side (including the number of occupied
Number
of points stations) + 16 points
Description