Table of Contents
Advertisement
4.2 745PC SOFTWARE INTERFACE
c) LOADING SETPOINTS FROM A FILE
Loading the 745 with setpoints from a file is accomplished as follows:
1.
Select the File > Open menu item.
2.
745PC launches the Open dialog box listing all filenames in the 745 default directory with the extension 745. Select the
setpoint file to download and click OK to continue.
4
3.
Select the File > Send Info to Relay menu item. 745PC will prompt to confirm or cancel the setpoint file load. Click
Yes to download the setpoints to the 745 relay or No to cancel.
d) ENTERING SETPOINTS
The following example illustrates the entering of setpoints from the 745PC software.
1.
Select the Setpoint > System Setup menu item
2.
Click the Transformer button in the System Setup window.
3.
The following dialog box prompts for the transformer setpoint information. Note that the number of selections shown is
dependent on the 745 installed options.
4-12
Courtesy of NationalSwitchgear.com
Figure 4–11: OPEN SETPOINTS FILE WINDOW
Figure 4–12: TRANSFORMER SETPOINTS WINDOW
745 Transformer Management Relay
4 HUMAN INTERFACES
GE Multilin
Advertisement
Table of Contents
