Advertisement
2.5 TRACK DRIVE UNITS
2.5.1 Oil Fitting & Draining
Below are the 3-common oil filling/draining configurations:
To fill, track the machine until the gearbox casing is level with a plug positioned as shown
below. Fill from the upper hole until oil reaches the level indicated.
To drain, track the machine until a plug is at 6 o'clock position as shown below. Unscrew both
plugs and allow all oil to discharge into a suitable container. Dispose of waste oil in a safe and
approved container. Dispose of waste oil in a safe and approved way.
Do not fill oil in the track drive without checking oil level inside it. All track systems
are supplied by manufacturer with a measured quantity of oil in the track drive.
!
WARNING
14
Advertisement
