Advertisement
1.7 WORKING CONDITIONS
Avoid using the rubber tracks in the following situations:
1. Do not use in marine and seaside environments. Saline air will cause the rubber and the
internal steel cords to lose adhesion.
2. Do not keep the tracks in exposed sunlight for extended periods of time as UV rays will
shorten the life of the rubber track.
3. Avoid spilling fuels and synthetic oils on the rubber tracks, if this occurs, wash off
immediately to prevent corrosion and unnecessary damage to the system.
4. Avoid rubber track contact with sharp edges, particularly sharp concrete edges. This
point loads the track and can cause damage to the internal steel cords in the belt.
5. Rubber track systems are designed to be used on smooth soft ground.
6. Do not attempt to track over obstacles which are taller than the centerline of the idler.
1.8 OPERATING TEMPERATURE
The operating temperature range for the track systems is 14°F to 104°F. Always consult
manufacturer when temperatures fall outside this working range as alternate component
specifications will be required.
Avoid using on asphalt or concrete surfaces when the ground temperature is high. The rubber
tracks will absorb the heat and become softer, which can accelerate wear when performing
maneuvers.
6
Advertisement
